header2.jpg (21621 bytes)

navigationmenu.jpg (7971 bytes)

 

APEXi Super AFC install

Custom Camshafts

electronics_safc1.jpg (6911 bytes)

Our Sponsors

Nitrous Express

Phantom Grip

Thermal R&D

 

Nopi Nationals 2002 INFO

 

Fun with Carbon Fiber

 

saturnside.jpg (144201 bytes)

Fox Marketing SC2

 

auto1000.gif (8750 bytes)

Click through to help keep Saturnspeed.com in the top 100!

1st Gen Body Kits!!

Here is your sneak peak of the first 1st Generation SC2 Body kit. This kit is brought to you by BG Imports and Eurostyles. For more information click on the link or check the thread on our Message Forum.

colorbar.gif (4491 bytes)

1.19.04
We have finally switched over to the new server. We are going through some growing pains right now. The new site is in development at our test server. We will also be moving to a YaBBse board sometime this month. We are moving things along as quickly as possible. We just do not want to drop the old format offline until we get most of the content moved to the new one. Check back often, and we apologize for any bugs you may find in the current layout.
12.16.03
I know it has been a long time since our last update, but hold on. It will be worth it. We will be releasing a totally revised website after the first of the year. Complete with a new more integrated message board. Stay tuned!
12.8.02
Please bear with us as we are SLOWLY making updates to the website. "Ride of The Week" is being temporarily postponed, but please don't let that stop you from sending in your submissions. We will be getting back to it as soon as possible. We are also looking into updating our Message Forum so that members can post pictures of their rides in their "profiles".
8.3.02 - Readers "Ride of The Week"
Our "Ride of the Week" submission form is now up. If you would like to see your Saturn featured here, fill out the form and let us know. Ride of the Week
8.3.02 - Phantom Grip Diff Pin Saver Issues
If you have recently purchased a Phantom Grip Diff Pin Saver kit, and have not yet installed it, contact Phantom Grip to see if you need the modified version. It has been discovered in one instance that the replacement pin was slightly too long causing contact with a small portion of the transmission housing casting. If you have already had your Diff Pin Saver kit installed by a competent mechanic then there is no need to worry. The issue may only be present in a few transmissions due the irregularities in the casting process. Any new Diff Saver kits purchased from this point on will not exhibit this issue. Again, this issue has only been found in ONE transmission. But Phantom Grip has already re-designed their kit. This speaks very well for their dedication to their customers.

colorbar.gif (4491 bytes)

 


Email the Webmaster

Copyright © 2000 Saturnspeed All Rights Reserved